EINHELL DSS 260/2 DL Operations Instructions download pdf (Page 9)

4. Technical data

Release torque max. 312 Nm

Working range (max. thread size) M14

Permissible working pressure max. 6.3 bar

Idle speed 7250 min

-1

Square drive 12,7 mm (1/2 inch)

Air consumption (6,3 bar) 114 l/min.

Recommended hose diameter internal Ø 10 mm

Weight 2.3 kg

Sound and vibration

Sound and vibration values were measured in

accordance with EN 792-6.

sound pressure level 84,4 dB(A)

uncertainty 3 dB

sound power level 95,4 dB(A)

uncertainty 3 dB

Wear ear-muffs.

The impact of noise can cause damage to hearing.

Total vibration values (vector sum of three directions)

determined in accordance with EN 792-6.

Vibration emission value a

= 2.6 m/s

K uncertainty = 0.72 m/s

Keep the noise emissions and vibrations to a

minimum.

 Only use appliances which are in perfect working

order.

 Service and clean the appliance regularly.

 Adapt your working style to suit the appliance.

 Do not overload the appliance.

 Have the appliance serviced whenever

necessary.

 Switch the appliance off when it is not in use.

 Wear protective gloves.

Air quality

cleaned and oiled

Air supply

via conditioning unit with filter pressure reducer

and mist oiler

Compressor capacity

approx. 250 l/min. equivalent to a motor rating of 2.2

Work settings

6 bar working pressure set at the pressure

reducer or filter pressure reducer

5. Putting into operation

Screw the plug-in nipple included in delivery into the

air connection, having first wrapped 2 - 3 layers of

sealing tape around the thread. Attach the required

drive socket/bit to the square drive mount. Adjust the

direction of rotation on the guide lever.

R = reverse/release screw, F = forward/tighten

screw. Place the drive socket or bit on the nut or

screw head. Press the trigger. The air supply can be

adjusted by simultaneously depressing and turning

the air regulator. Mark 4 = max. torque, mark 1 =

min. torque. The tool is connected to the air supply

by means of a flexible pneumatic hose with a quick-

release coupling. To get the best performance out of

your screwdriver, use a pneumatic hose with an

internal diameter of LW 10 mm.

6. Maintenance and cleaning

Observance of the following maintenance

instructions will ensure that this quality tool gives you

years of troublefree service. Regular lubrication is

vital for the long-term, reliable operation of your

impact screwdriver. Use only special tool oil for this

purpose. You can choose from the following options

for lubricating the tool:

6.1 By mist oiler

A complete conditioning unit includes a mist oiler and

is fitted to the compressor.

6.2 By hand

Each time before you use your impactscrewdriver,

feed 3-5 drops of special tool oil into the air

connection. If the pneumatic tool has not been used

for several days, you must feed 5-10 drops of oil into

the air connection before you switch on. Keep your

pneumatic tool in dry rooms only.

6.3 Adjustment of resistance at the pivot arm (3)

By turning the adjustment screw (6) the resistance

when shifting the bolts (3) can be adjusted.

Anleitung_DSS_260_2_11060_SPK1:_ 01.09.2010 12:49 Uhr Seite 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comments to this Manuals

No comments

EINHELL DSS 260/2 DL Operations Instructions Page 9

Comments to this Manuals